Sunday, May 27, 2012

14MHz 5el OWA Yagi

A 5 element OWA Yagi for 14MHz with a 15.668mtr boom

Revised September 2010 v1.0
Premium commercial versions of this antenna at Innovantennas


I WILL MODEL THIS ANTENNA IN ANY TUBE SIZE OR TAPER SECHDULE FOR YOU, CONTACT ME VIA EMAIL

This is a high-gain, wideband OWA (Optimised Wideband Array) Yagi which covers the whole of the 20m band with an SWR of less than1.25:1. It has options with both UK/USA and European sized tube and has a 4 section taper.
This Antenna has been modelled using NEC4 and confirmed by FEKO. This is thousands of dollars of the very latest antenna design software available and the results are highly accurate. When loading into your software, you will see similar SWR but not the same. Please do not alter the model, build to these dimensions for the best results.
Contact me if you are unsure what correction (if any) you require for the element holders/stand-offs you will use or any other questions you may have. 

Also read 'An intro to OWA Yagis' and 'Creating a Balun'

Antenna Layout and Construction:




Performance
10.34dBi @ 14.175MHz
24.42dB @ 14.175MHz
SWR: Below 1.25:1 from 14MHz to 14.350MHz

Construction details

Refer to the above drawing.

Antenna Dimensions for UK/USA and European sized tubing
Taper: inner Section, 1.25 inch or 30mm tube (total length 2.2m). Mid Section 1 inch or 25mm tube,  Outer section 3/4 inch or 20mm tube. End sections as per below schedule ( 5/8 inch or 16mm tube).

                           Spacing                  End Section Length   (All below sizes in Metres)
Reflector                0                              2.022
DE1                      3.277                        1.905
D1                        4.926                        1.678
D2                        9.353                         1.550
D3                       15.668                       1.260

No comments: